how to make tap water taste better

How to make tap water taste better: The Ultimate Guide

Water doesn’t necessarily have to be pure. Many people prefer tap water in many places around the globe for different reasons.

Some countries drink tap water for its cost efficiency and convenience. In others, tap water is better than bottled water for taste and quality.

Even if you prefer to drink bottled water, there will be times when you must use tap water. These situations are when it is important to know how to make tap water taste better.

There are many ways to make tap water taste better. We’ll be discussing different ways to make tap water taste more delicious in this article.

The municipal water quality can vary depending upon factors such as location, season, and water treatment methods. You can check with your local water department to determine if the tap water is safe for drinking.

Tap Water: Why Drink it?

If there aren’t any health concerns, tap water is safe to consume.


Tap water is a convenient and popular source of clean water. All you have to do when you feel thirsty is turn on the tap. It’s not necessary to carry around heavy containers or buy water bottles.


Tap water is always less expensive than bottled water. These costs are passed onto consumers because bottled water is packaged and distributed. Tap water, on the other hand, is often provided at very low prices by local governments.

The Government regulates

Government agencies regulate tap water. This means that tap water is regularly tested for safety and quality.

All public drinking water systems in the United States are regulated and regulated by the Environmental Protection Agency. The EPA establishes limits for contaminants in tap water to ensure safe drinking water.

Environmentally friendly

Drinking tap water is an environmentally-friendly choice. You don’t need plastic bottles, which end up in landfills or oceans.

These are just some of the reasons we might be tempted to drink tap water. There is always the flip side to the coin.

What’s the problem with tap water?

Because of the chemicals that are used to treat tap water, it can often have a strange taste or odor. These are the top problems associated with tap water.

Variabilities in Source Parameters

Tap water can come from many sources, including rivers, lakes, and underground aquifers. Depending on where the water comes from, its chemical and biological contents may vary.

These sources can also be affected by weather, geography, or human activity. This means that tap water can taste different at different times and locations.


To kill bacteria and other microorganisms, tap water is frequently chlorinated. Chlorine, a powerful disinfectant, can give water a foul taste and odor. Chlorine cylinder valves of disinfection system for water treatment plant

Drinking chlorine-treated tap water can be dangerous if it isn’t consumed regularly. The US EPA regulates how much chlorine is allowed to be in public drinking water.

The chlorine can react with organic compounds during water treatment to create disinfection products (DBPs). If you’re exposed to DBPs for a prolonged period, they can cause serious health problems.

There are several ways to remove chlorine from tap water, including boiling, carbon filtration, and reverse osmosis.

Transferring water

Tap water can also taste bad because it is delivered via miles of piping. The water is transported under the pressure of the municipal water supply.

Water can pick up contaminants along its journey from pipes and valves that regulate its flow. Tap water can pick up contaminants that may cause hardness, odor, or unpleasant tastes for consumers.

These are just a few reasons why tap water might not taste as good. There are many ways to improve the taste of tap water.

What can we do to make tap water taste better?

There are many things you can do that will make tap water taste better.

You can make tap water taste better depending on where you live.

Filtering water

Filtering tap water can make it taste better. There are many types of filters on the market. They remove chlorine and other foreign particles from the water.

Water filters may be in the form of a pitcher, a faucet attachment, or an aerator filter.

They can be placed under the sink, or integrated into the entire house filtration system.

Carbon filters can also be installed on your refrigerator’s water dispenser for better taste. There are many options for filtering tap water.

Letting Water Stand

It is possible to leave tap water in a container for several hours and it will taste better. This is because chlorine added to water treatment has had time to evaporate into the air.

Allow the water to stand for at least 24 hours to remove all chlorine. To keep any contaminants from entering your water, cover the container at least partially.

Aerating water

Tap water can also be aerated to improve its flavor and odor. The water comes out of the faucet and is aerated to mix air with it.

This process removes chlorine and increases the dissolved oxygen.

There are many types of faucet aerators on the market. It is a relatively inexpensive upgrade that can make a huge difference in water quality.

Some faucets come with built-in aerators. Make sure you do your research before you buy.

Boiling water

Boiling water can also improve its taste. It is an efficient way to remove chlorine and any volatile organic compounds which may be dissolved.

You should boil your water in stainless steel or glass. The thermoplastic kettles can leak contaminants into tap water. This will not only ruin the taste of your water but can also cause it to be unsafe to drink.

Optimize water temperature

Your tap water’s temperature can affect its taste. It may taste less good if the water is too hot.

This is because cold water is denser than warm water, creating a better consistency to satisfy your thirst and taste buds.

Experts say that drinking water should be at room temperature (20°C/68°F) for best flavor and chilled cold (6°C/43°F) for maximum refreshment.

Use Lemon or Lime Juice

A few drops of lime or lemon juice can improve the taste of your water. The chlorine in tap water will be masked by the flavor and aroma of lemon or lime juice.

You don’t have to add fresh lemon or lime juice to your water. Instead, just add a slice or two of lemon or lime to your drink. You can also improve the taste and quality of your tap water. This will help you get more Vitamin C from lemons and limes.

Add Mint Leaves

Mint leaves can be used in more than just your mojito or tea. To enhance the taste of tap water, you can add them.

Simply add a few leaves of mint to your glass or water bottle and allow it to sit for a while. The mint aromas and flavor will be released into the water, refreshing the water’s taste.

You can also add trace mineral drops

You can also improve the taste of tap water by adding trace mineral drops. These drops contain various minerals that are vital for good health. Depending on individual preferences, they can improve the taste of tap water.

You can find many types of mineral drops at your local grocery or health food store. You can even get them in different flavors to enhance the flavor of your water. Add a few drops to your tap water and you will notice a difference in taste.

You can also use a pitcher or mineral filter to add magnesium, calcium, and other essential minerals to the water.

A water bottle that filters water and ionizes it is a good choice.

Water bottles can be equipped with a filter to remove chlorine from tap water.

This is especially useful if you bring water to the gym with you, where there isn’t a water fountain.

Before you head to the gym, fill your water bottle and enjoy filtered water all through your workout. This will not only improve the taste of your tap water but also make it healthier for you.

You can add a greens mix to your water

You can add a greens mix to your water if you don’t mind some color change. A greens mix is typically made from spinach, kale, and other leafy greens.

It can also be a great way for you to get your daily vitamins and minerals while improving the taste of your water.

These greens blends are available in many flavors, including raspberry lemonade, chocolate, and fruit punch. A greens blend may be the best way to enhance the taste and nutrition of tap water.

Ice cubes can be added

Ice-cold water is not for everyone. If you do like ice-cold water, adding ice cubes can make tap water taste better.

In ice trays, you can freeze natural flavor enhancers such as mint and lemon. This will give water a more flavorful experience than regular ice cubes.


Carbonated water is loved by some people while others dislike it. Carbonation may be the best way to enhance the taste of tap water.

Carbonation adds bubbles to your water and makes it more refreshing. To carbonate your tap water, you can either buy a carbonated watermaker or use a soda streamer.

To give your carbonated water a subtle sweetness, you can add natural sweeteners such as stevia or a slice of lemon or lime.


Tap water is more sustainable than bottled water and has less plastic. It can taste a little bit different, especially if it isn’t your usual water source.

You can make tap water taste better by adding flavor enhancers to it, filtering it, and drinking it at the right temperatures. Each person will find the right solution. So, try these tips to see which one works for you.

Leave a Reply

Your email address will not be published. Required fields are marked *